WINBELT - Belt Conveyor Design Software by Creative Engineering

Need a Building Feasibility Study? WINBUILDIT
can do.

WINBELT
A Belt Conveyor Program
by CREATIVE ENGINEERING (USA)

Software Consulting Service Recommendations Contact Us Request Free Demo

WINBELT
Features

WINBELT Belt Conveyor Design and Estimating.
ESTIMATOR Estimate, qualify Belt Conveyors in seconds.
HAULPLAN Determine most profitable haulage arrangement.
CTRUSS Rapid design and estimate of belt conveyor trusses and small bridges.
CBENT - Rapid design and estimate of belt conveyor truss supports.
CTOWER - Rapid design and estimate of machinery support structures.

WINBUILDIT Design and economic analysis of mine and mill buildings

FEEDER FRICTION Determine resistance at belt conveyor feeders.

DISCHARGE TRAJECTORY Enables design of discharge chutes.

137 page instruction manual explains how.

USERS REPORT

Suverhoist

Latest technology for in-pit crushing

FEEDER FRICTION
Determine Resistance at Belt Conveyor Feeders

FEEDER FRICTION accessed from AA_WINBELT menu bar enables determination of the added friction due to a belt feeder or similar feed arrangements if used on a conventional belt conveyor.

FEEDER FRICTION APPLICATION

Users of AA_WINBELT enter feeder friction as an extra resistance in the section (length) in which it occurs. Other resistances such as idler, impact bed, slope, skirt board, acceleration and flexure are computed from within AA_WINBELT.

FEEDER FRICTION BRIEFLY

Accessed from AA_WINBELT menu bar, drop down from UTILITIES to FEEDER FRICTION. User enters and clicks onto 6 parameters listed under B F GOODRICH METHOD FEEDER FRICTION. Clicking onto COMPUTE lists FRICTION FORCE below.

To properly utilize the information, selected FRICTION FORCE is entered, within the section in which it occurs, in AA_WINBELT at 15 - EXTRA RESISTANCE.

Don Suverkrop, P.E.

3513 Century Drive, Bakersfield, CA 93306-1238
Phone: 661 871 2168, Fax: 661 871 1798